: Use the MODE button to cycle through AUTO (automatically switches between AC and Propane), Electric (AC only), and Propane (LP only).
: Touch and release the ON/OFF button to start. A solid green (or blue) light indicates normal operation.
: There is no dedicated reset button. To reset, disconnect all AC, DC, and propane power for at least 5 minutes. Safety Recall : Many 1200-series units (including
: Adjust settings from 1 (warmest) to 5 (coldest) using the temp buttons. It typically takes 12–24 hours to reach full cooling after startup. Troubleshooting & Maintenance :
) have a history of fire risks and may require a high-temperature safety sensor kit. If you see a on the safety device behind the rear access panel, it may have tripped.
: Use the MODE button to cycle through AUTO (automatically switches between AC and Propane), Electric (AC only), and Propane (LP only).
: Touch and release the ON/OFF button to start. A solid green (or blue) light indicates normal operation.
: There is no dedicated reset button. To reset, disconnect all AC, DC, and propane power for at least 5 minutes. Safety Recall : Many 1200-series units (including
: Adjust settings from 1 (warmest) to 5 (coldest) using the temp buttons. It typically takes 12–24 hours to reach full cooling after startup. Troubleshooting & Maintenance :
) have a history of fire risks and may require a high-temperature safety sensor kit. If you see a on the safety device behind the rear access panel, it may have tripped.
