: Place the unit on a flat, sturdy floor. Adjust the front feet to compensate for any unevenness; the inclination should not exceed 2°.
: Connect the water inlet hose to a cold water tap. Ensure the hose is not kinked, as this can cause fill errors.
: It is recommended to run a "wash cycle 2" at 90°C without laundry but with detergent to clean the internal components. Control Panel and Operation The WI 101 features a straightforward mechanical interface. Detergent Dispenser : Compartment 2 : For main wash detergent (powder or liquid). Compartment 3 : For additives like fabric softener. Starting a Program : indesit wi 101 instruktsiia
: Turn the knob to the "Reset" position and wait for the LEDs to flash. You can then select a new program. Wash Programs and Features
Select the desired cycle by turning the . : Place the unit on a flat, sturdy floor
: You must remove the 3 protective screws and rubber spacers from the rear of the machine. Seal the remaining holes with the provided plastic plugs.
Set the wash temperature using the dedicated temperature knob. Ensure the hose is not kinked, as this can cause fill errors
Before using the machine, ensure it is properly installed to prevent damage or excessive noise.