Jensen A220 Amp Manual Online

Attach the ground wire to a clean, unpainted section of the vehicle's chassis. Keep this wire as short as possible—ideally under 36 inches.

While official modern documentation is limited, historical data and expert overviews highlight the following specifications: Rated at 100W x 2 channels (Max). Jensen A220 Amp Manual

The is a vintage-style 2-channel MOSFET power amplifier often used to upgrade car audio systems. This model is typically recognized for its "100W + 100W" power rating, which can reach up to 250 Watts when bridged into a mono channel. Key Performance Specifications Attach the ground wire to a clean, unpainted

Connect this to the head unit’s amplifier turn-on lead or power antenna output to ensure the amp powers on with the radio. The is a vintage-style 2-channel MOSFET power amplifier

Use the Low-level (RCA) inputs for the best audio performance. If your factory head unit lacks RCA outputs, high-level speaker wire inputs can be used. Safety & Maintenance Tips owner's manual - Jensen Mobile

Stable down to 2 ohms in stereo mode ; however, a minimum of 4 ohms is recommended when bridged to prevent damage.