If a "Bump Fail" screen appears, the instrument cannot be used until a successful calibration is performed. GP-03 Operator's Manual - Geotech Environmental Equipment
If the archive contains the , it is used to adjust instrument parameters that are not available in the standard hardware menus.
Select "Extract Here" or "Extract to [KS] KS4 GP03/" to view the files. [KS] KS4 GP03.rar
Once the peak value is established at 40, set the Alert threshold to trigger at a value slightly above this peak to ensure you are notified of actual knock events. 3. Using the GP-03 Component
Adjust the settings until the peak readings display approximately 40 on the device's scale. If a "Bump Fail" screen appears, the instrument
Ensure the engine is operating correctly and the KS-4 alerts are turned OFF before starting the configuration.
Press and hold the POWER MODE button until it beeps and the backlight turns on. Once the peak value is established at 40,
Use the setup program on your PC to modify settings such as Bump Fail Behavior or Auto Zero Adjustment .