Ltupps.rar [Limited ◉]

Note : At this depth, a 5-foot post will stand about 3 feet above the ground, which is a standard height for accessibility.

: Dig a hole approximately 2 feet deep and 1 foot wide.

: Use 2.5-inch lag screws to drill through the base of the library and into the post topper to lock it in place. LTupps.rar

: Place the post topper upside down. Fit your 4x4 wooden post between the two mounting posts of the topper.

If you are instead trying to "post" content to the Linus Tech Tips (LTT) forum, ensure you are in the correct sub-forum (like "General Discussion") and use the "Image" icon to paste URLs if you are sharing photos of your build. How to Assemble a Little Free Library Post Note : At this depth, a 5-foot post

: Drive two screws through the pre-drilled holes on the sides and one through the topper directly into the 4x4.

: Fill the hole with dirt or gravel, tamping it down firmly as you go to ensure stability. 3. Mount the Library : Place the post topper upside down

: Center the post in the hole. Use a level to ensure the topper is even with the ground before filling.