, you must establish a connection between your computer and the Connect the to your router or PC using a standard CAT5/CAT6 cable. Default IP Address: The defaults to 192.168.1.5 .
Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:
The .rar file generally contains the programming environment or relevant configuration utilities for the Go to product viewer dialog for this item. nano10.rar
Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation
Most TRi PLC software is Java-based. Ensure you have a compatible Java Runtime Environment (JRE) installed on your PC. , you must establish a connection between your
Use a utility like WinRAR or 7-Zip to extract the contents.
It supports Modbus protocol for integration with HMI or SCADA systems. If your router uses 192
For more detailed technical specifications, you can refer to the Nano-10 User Manual or the Quick Start Guide provided by the manufacturer. Are you trying to connect the