Sushka Pilomaterialov Shema «FAST ⟶»

Industrial drying schemes, particularly in convective kilns, generally consist of four main stages:

The drying of sawn timber () is a critical industrial process designed to remove excess moisture from wood while maintaining its structural integrity and preventing defects like warping or cracking. A standard drying scheme typically follows a structured technical workflow: 1. Preparation and Stacking sushka pilomaterialov shema

Temperature is gradually increased while humidity is lowered. This creates a pressure gradient that moves moisture from the center of the plank to the surface. This creates a pressure gradient that moves moisture

Planks are separated by wooden strips (spacers) of uniform thickness to allow air to circulate freely through the stack. Specialized schemes used for thick beams or expensive

Once the target moisture content is reached (typically 8–12% for joinery), the wood is held at a specific temperature to equalize moisture throughout the board.

Specialized schemes used for thick beams or expensive hardwoods where standard drying might cause severe cracking.